Rust Remover - 1 Liter

Akemi Rust Remover - 1 Liter

Cleaning agent, acidiferous. Free of hydrochloric acid and is biologically degradable.

Enables rust and rust stains to be removed effortlessly from acid-resistant natural and artificial stone. In addition, rusty metal inclusions in natural stone (granite) are automatically transformed with a long-term protective effect. 

Not suitable for limestone and other natural stones which are not resistant to acids!

Consumption: approx. 10 - 20 m²/liter
Size: 1 Liter

Instructions for use:
1. Apply undiluted with a solid brush or spatula to the dry stone surface. To avoid new rusting on untreated surfaces and changes in color, apply to the entire stone surface.
2. Allow product to work for up to 24 hours
3. Avoid drying of treated surfaces. It is recommended to cover with a synthetic foil.
4. Rinse thoroughly with water until any excess of the product has been taken away.
5. Repeat process on dry stone if necessary.
6. After the stone has been successfully treated, it is recommended to protect it with either Akemi Stone Impregnation or Akemi Stain Repellent NANO in order to prevent watery substances from penetrating into the stone as an additional measure against new rust.

Surface Rough, Fine-ground, Ground, Satinated, Bush-hammered, Sand blasted, Antique, Sawn, Raugh sawn, Rough, Polished, Flamed

Chemical Basis Water-based

Method of Application Scrubber, Mop, Brush, Manual

Concentration Concentrate

PH Value Acidic

Cleaning Removal of stains & special cleaning

Material Natural stone, Granite

Area of application Kitchen, Bathroom & sanitary, Table & window sill, Flooring & stairs, Garden & terrace, Gravestone & monument, Facade

Technical Data Sheet    SDS     Detergents

Not sure which product you need? Check out Akemi's stain guide
Akemi Stone Guide for concrete & natural stone
Akemi Stone Guide for ceramic / sintered stone